Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® C33 - PA666 - BASF

Material Data Center offers the following functions for Ultramid® C33:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultramid C datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Termiche - Altre Proprietà - Proprietà Specifiche Materiale
Any use of this information falls under the rules of our disclaimer.
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 196 °C ISO 11357-1/-3
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 10.5 % Sim. alla ISO 62
Assorbimento d'umidità 3.2 % Sim. alla ISO 62
Massa volumica 1120 kg/m³ ISO 1183
Moisture Content 0.08 % -
Bulk density 780 kg/m³ -
Proprietà Specifiche MaterialeValoreUnitáNorma del test
ISO Data
Numero di viscosità 195 cm³/g ISO 307, 1157, 1628
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla, Altre Estrusioni
Forma fisica disponibile
Pellet
Caratteristiche
Copolimero
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Applicazioni
Monofilament
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.